Skip to main content
Log in
Microchip Technology DSC6102MI3B-030.0000 — Crystals & Oscillators

Microchip DSC6102MI3B-030.0000 MEMS XO, 30 MHz, AEC-Q100

MPNDSC6102MI3B-030.0000
Active

Microchip Technology DSC61XXB series MEMS XO (Standard), 30 MHz, CMOS output, ±20 ppm stability, AEC-Q100, 4-VFLGA package, 1.8V to 3.3V supply.

Microchip Technology DSC6102MI3B-030.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6102MI3B-030.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC61XXB
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply3mA (Typ)
Frequency30 MHz
Frequency stability±20ppm
Operating temperature-40°C~85°C
Size (Dimension)0.079\" L x 0.063\" W (2.00mm x 1.60mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageBag
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VFLGA

Product details

Why the AEC-Q100 rating and MEMS resonator matter for your BOM

The DSC6102MI3B-030.0000: Combined with ±20 ppm frequency stability over -40 to +85°C, the output stays within 600 Hz of 30 MHz across the full temperature band. The Enable/Disable pin gates the output without powering down the internal PLL, so the oscillator can be tri-stated for system test modes.

The surface-mount land pattern matches the standard 4-pin LGA layout — no special via-in-pad or microvia required for a two-layer board.