Microchip Technology DSC61XX series MEMS XO (Standard), order code DSC6102CI2A-100.0000, 100 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, AEC-Q100, 4-SMD No Lead.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Current - supply (Disable) | 12µA |
| Frequency | 100 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6102CI2A-100.0000: The Enable/Disable function tri-states the CMOS output, allowing the clock line to be shared or gated without an external buffer.
No pin-compatible direct replacement is documented, so a BOM revision or board spin may be required for new builds.
Supplied in tube packaging — confirm pick-and-place feeder compatibility if your line is set up for tape-and-reel only.