Microchip Technology DSC61XX series, XO (Standard) MEMS oscillator, CMOS output, 1 MHz ~ 100 MHz programmable, 4-SMD No Lead, AEC-Q100 rated, ±50ppm total stability.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 3mA (Typ) |
| Available frequency range | 1 MHz ~ 100 MHz |
| Frequency stability (Total) | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Bulk |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6102CI1A-PROGRAMMABLE: Total frequency stability of ±50ppm across the full operating range means the clock edge stays within tight bounds for CAN, LIN, or Ethernet PHY reference timing without external trimming.
No pin-compatible direct replacement from Microchip is documented, so a BOM review for an alternative MEMS XO in the same 4-SMD footprint is advised for new builds.
It is a programmable MEMS XO covering 1 MHz to 100 MHz with a CMOS output.