72 MHz MEMS clock with automotive-grade qualification
The DSC6101ML2B-072.0000T: The ±25ppm frequency stability covers temperature and supply variation, which is tight enough for 100BASE-T Ethernet PHY clocking or high-speed MCU timing without needing a TCXO.
Supply voltage and output drive flexibility
Typical supply current is 3 mA maximum, which is low enough for battery-powered modules and thermally constrained enclosures.
Package and board-level integration
The land-grid array pads are on the bottom face; the PCB land pattern should match the recommended stencil aperture to avoid solder bridging, especially given the fine pitch. No external load capacitors are needed — the CMOS output directly drives the clock input of the target device.