Microchip Technology DSC61XXB series XO (Standard), MEMS-based, 25 MHz, CMOS output, AEC-Q100 rated, 4-VFLGA package, 1.71V~3.63V supply, ±20ppm stability.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 3mA (Typ) |
| Frequency | 25 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.079\" L x 0.063\" W (2.00mm x 1.60mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Bag |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VFLGA |
The DSC6101MI3B-025.0000: Typical current draw is 3 mA max at 25 MHz — the MEMS die consumes less than a comparable quartz oscillator at the same frequency, which matters for power-budgeted ECU modules where every milliamp is accounted for in the thermal simulation.
CMOS output swings rail-to-rail into a 15 pF load — the drive strength is matched to typical MCU and SoC clock inputs without external termination, simplifying the layout trace routing.
This part is sourced to order against your BOM quantity through independent distribution.