Microchip Technology DSC61XXB series MEMS XO (Standard), order code DSC6101JL3B-025.0000T, 25 MHz, CMOS output, ±20 ppm stability, 1.71V–3.63V supply, AEC-Q100, 4-VLGA, -40°C to +105°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 3mA (Typ) |
| Frequency | 25 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VLGA |
The DSC6101JL3B-025.0000T: Surface-mount on a standard 4-pad land pattern; the MEMS die inside the package handles the 25 MHz fundamental without a PLL, so there is no multiplied phase noise from an internal VCO.
The DSC61XXB series includes a range of frequencies and stability grades; the ±20 ppm option here covers most CAN, Ethernet, and MCU clock requirements without external trimming.
It is a 25 MHz XO (Standard) with CMOS output — the single-ended CMOS signal interfaces directly with most MCU, FPGA, and SoC clock inputs without a level translator.
The Enable/Disable pin allows the system to gate the clock for low-power standby modes.