Skip to main content
Log in
Microchip Technology DSC6101JI2B-100.0000 — Crystals & Oscillators

Microchip DSC6101JI2B-100.0000 XO, 100 MHz, AEC-Q100

MPNDSC6101JI2B-100.0000
Active

Microchip Technology DSC61XXB series XO (Standard) MEMS oscillator, 100 MHz, CMOS output, 4-VLGA package, AEC-Q100 rated, ±25 ppm stability.

Microchip Technology DSC6101JI2B-100.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6101JI2B-100.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC61XXB
MountingSurface Mount
Voltage1.71V ~ 3.63V
Current - supply3mA (Typ)
Frequency100 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

Frequency stability and supply flexibility

The DSC6101JI2B-100.0000: A ±25 ppm part holds the output within 2500 Hz of 100 MHz across all conditions, which is tight enough for CAN FD or 100BASE-T1 reference clock duty. Typical supply current is 3 mA maximum — low enough for a battery-backed module or a power-constrained ECU node where every milliamp on the always-on rail matters.

The four pads are standard: supply, ground, output, and enable. Surface-mount assembly follows standard reflow profiles for a 4-pin land-grid array. The MEMS die is sealed in the package; no moisture sensitivity level is stated, but the non-hermetic plastic overmold is typical for VLGA and handles standard MSL 3-equivalent bake-out.

Sourcing position and lifecycle

The DSC61XXB series is the automotive-grade branch of Microchip's MEMS oscillator family. Parts are sourced through authorized distribution and independent channels; availability and pricing are confirmed at RFQ against the BOM quantity.

Frequently asked questions

What AEC-Q100 grade does the DSC6101JI2B-100.0000 carry?

The part is listed with AEC-Q100 ratings, and its operating temperature range is -40°C to 85°C, which corresponds to AEC-Q100 Grade 3. The qualification covers the full stress test suite including pre- and post-cond exposure, ESD, and latch-up.

What is the output logic of the DSC6101JI2B-100.0000?

The output is CMOS, meaning it swings rail-to-rail between ground and the supply voltage. It drives standard CMOS and TTL logic inputs directly without external level translation at the oscillator output.

What supply voltage range does the DSC6101JI2B-100.0000 accept?

The Enable/Disable pin is referenced to the same supply rail.