50 MHz MEMS oscillator — what the ratings mean for the BOM
The DSC6101JI2A-050.0000: AEC-Q100 qualification certifies this oscillator for automotive-grade stress testing — temperature cycling, ESD, and latch-up screening per the semiconductor reliability standard.
At 3 mA typical active current it draws less than a standard quartz oscillator's 5-10 mA, and the 12 µA disable current drops the load to near-zero when the Enable/Disable pin is pulled low, extending battery life in a key-off or sleep mode. The no-lead land pattern means the part is reflow-soldered with the same profile as the rest of the board — no hand-solder step needed.
Obsolete — sourcing the DSC6101JI2A-050.0000 today
Available inventory is lot-specific — confirmed at RFQ time. The 50 MHz MEMS oscillator with CMOS output and ±25ppm stability is a common enough parametric profile that a pin-compatible alternative from the same DSC61XX family may exist; the buyer should verify the specific order code against the board's timing requirements before committing.