Skip to main content
Log in
Microchip Technology DSC6101JI2A-048.0000T — Crystals & Oscillators

Microchip DSC6101JI2A-048.0000T MEMS XO, 48 MHz, AEC-Q100

MPNDSC6101JI2A-048.0000T
Obsolete

Microchip Technology DSC61XX series, XO (Standard) MEMS oscillator, 48 MHz, CMOS output, ±25 ppm stability, 1.8V-3.3V supply, AEC-Q100, 4-SMD no-lead package, Tape & Reel.

Microchip Technology DSC6101JI2A-048.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6101JI2A-048.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC61XX
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply3mA (Typ)
Current - supply (Disable)10.5µA
Frequency48 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Power budget and enable/disable control

The DSC6101JI2A-048.0000T: Typical active current is 3 mA at 48 MHz — low enough that a 1.8 V rail feeding this oscillator plus a small MCU stays under 10 mA total, simplifying the LDO selection.

Obsolete — sourcing through independent channels

No official successor order code is recorded in the lifecycle data. Available through independent surplus and broker channels. Store the reels dry — MEMS oscillators are not moisture-sensitive like quartz, but the tape-and-reel packaging still benefits from ESD-safe storage.

Frequently asked questions

Where can I buy DSC6101JI2A-048.0000T?

This part is obsolete per Microchip's lifecycle status. No stock-holding claim is made — submit a request for the quantity you need.

What is the closest pin-compatible alternative to DSC6101JI2A-048.0000T?

No official successor or pin-compatible cross-reference is recorded in the lifecycle data. The DSC61XX family shares the same 4-SMD no-lead footprint and supply voltage range, but a direct replacement within the family would need to match the 48 MHz frequency, CMOS output, and AEC-Q100 rating. Confirm the BOM position before committing.