Microchip Technology DSC61XX series XO (Standard) MEMS oscillator, 37.5 MHz, CMOS output, ±25 ppm stability, AEC-Q100 rated, 4-SMD no-lead package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 37.5 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6101JI2A-037.5000T: Typical current draw is 3 mA max — low enough for always-on clocking in battery-backed ECU modules or sensor nodes where the oscillator stays powered during sleep.
Available through independent distribution channels; quantities are confirmed at RFQ. For a BOM line that requires this exact frequency and package, the last-time-buy window has closed — sourcing is limited to existing inventory lots.
No official pin-compatible successor is recorded from Microchip. The DSC61XX family shares the same 4-SMD footprint and supply range, but a different order code would need to match the exact 37.5 MHz frequency, ±25 ppm stability, and AEC-Q100 rating — confirm the full parametric set before substituting.
The part carries AEC-Q100 automotive qualification. Standard documentation includes the datasheet, RoHS/REACH compliance certificates, and the AEC-Q100 test report — these are available from Microchip's document portal or through the distributor at RFQ.