Microchip Technology DSC61XX series XO (Standard), MEMS oscillator, 20 MHz, CMOS output, 1.8V ~ 3.3V supply, ±25ppm stability, -40°C ~ 85°C, 4-SMD No Lead, AEC-Q100.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Current - supply (Disable) | 80µA (Typ) |
| Frequency | 20 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C ~ 85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6101JI2A-020.0000T: Active current draw is 3 mA typical, dropping to 80 µA typical when the Enable/Disable pin is pulled low — this shutdown state suits battery-backed or ignition-switched designs where the clock domain must idle without draining the rail.
This part is obsolete and no longer manufactured.
It is a 20 MHz MEMS oscillator with CMOS output, used as a clock source in automotive electronics (ECUs, ADAS, infotainment) and industrial systems where AEC-Q100 qualification and ±25 ppm stability are required.