Microchip Technology DSC61XX series XO (Standard) oscillator, 8 MHz, CMOS output, MEMS resonator, 4-VLGA package, AEC-Q100 rated, ±25 ppm stability, 1.8V~3.3V supply.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 8 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VLGA |
Microchip Technology lists the DSC6101JI2A-008.0000 as Obsolete.
Maximum current draw is just 3 mA typical — negligible in a battery-powered or thermally constrained design. That is tight enough for most UART, SPI, and general-purpose clocking needs — the ppm budget is the main thing to check against your receiver's tolerance.
It is a standard XO (Standard) oscillator with a CMOS output at 8 MHz. The CMOS rail-to-rail swing makes it a direct drop-in for most digital logic families without needing external level translation.