Skip to main content
Log in
Microchip Technology DSC6101JI1B-080.0000T — Crystals & Oscillators

DSC6101JI1B-080.0000T MEMS XO, 80 MHz, CMOS, AEC-Q100

MPNDSC6101JI1B-080.0000T
Active

Microchip Technology DSC61XXB series MEMS XO (Standard), 80 MHz, CMOS output, Enable/Disable, 1.71V~3.63V supply, ±50ppm, -40°C~85°C, 4-VLGA (2.50mm x 2.00mm), AEC-Q100, Tape & Reel.

Microchip Technology DSC6101JI1B-080.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6101JI1B-080.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC61XXB
MountingSurface Mount
Supply voltage1.71V ~ 3.63V
Current - supply3mA (Typ)
Frequency80 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

AEC-Q100 qualification and power budget

The DSC6101JI1B-080.0000T: It is suited for ADAS camera modules, infotainment head units, and body-control ECUs that specify a qualified timing source. Supply current is 3 mA typical at 80 MHz — low enough that a coin-cell-backed RTC domain can run the oscillator without draining the battery during standby.

Land-grid array footprint and assembly

The 4-VLGA package uses a land-grid array with four solder pads on the underside — no leads to bend, but the pad geometry and solder-paste stencil aperture must match the Microchip recommended land pattern to avoid head-in-pillow defects on reflow.

Frequently asked questions

What is the output type of this oscillator?

CMOS single-ended output, rated for 80 MHz.

What compliance documentation does Microchip provide for DSC6101JI1B-080.0000T?

The part carries AEC-Q100 automotive qualification. RoHS and REACH compliance are standard for the DSC61XXB series; the datasheet includes the full environmental compliance declaration.