Microchip Technology DSC61XX MEMS XO (Standard), DSC6101JI1A-039.6000T, 39.6 MHz, CMOS output, ±50 ppm, AEC-Q100, 4-VLGA package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Current - supply (Disable) | 80µA (Typ) |
| Frequency | 39.6 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VLGA |
The DSC6101JI1A-039.6000T: Typical supply current is 3 mA when enabled; pulling the Enable/Disable pin low drops consumption to 80 µA, useful for power-gated subsystems that must wake from a low-power state without a crystal start-up delay.
The MEMS resonator construction means the part is not subject to quartz supply constraints, but lot freshness should be verified for long-term drift performance.
We source this obsolete part through independent distribution channels.