The DSC6101JE2A-024.0000: The 24 MHz CMOS output swings rail-to-rail and is compatible with most MCU clock inputs, CAN/FlexRay transceivers, and Ethernet PHY reference clocks.
At 3 mA typical supply current, the oscillator draws less than a standard quartz-based XO — a meaningful saving in battery-powered or thermally constrained designs. This is useful for sleep-mode power budgets in automotive body controllers or IoT edge nodes that wake periodically.
The 4-pin footprint is standard for MEMS oscillators of this size — the two centre pads are the supply and ground, and the outer pads carry the output and enable. No exposed paddle means the thermal path is through the solder pads only. For a 24 MHz CAN bus node, this keeps the bit timing within the 1.5% tolerance window without external trimming.
Obsolete — sourcing through independent channels
Microchip lists the DSC6101JE2A-024.0000 as Obsolete. The part is no longer available through franchised distribution and must be sourced through independent surplus or broker channels. Availability is lot-specific and confirmed at RFQ. Buyers should expect to provide a target quantity and acceptable date-code window. Traceability documentation (RoHS, REACH, AEC-Q100 qualification) is available from the original manufacturer's datasheet.