Microchip Technology DSC61XXB series MEMS XO (Standard), DSC6101JE1B-030.0000, 30 MHz, CMOS output, AEC-Q100, ±50 ppm stability, 1.71V-3.63V supply, 4-VLGA package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 3mA (Typ) |
| Frequency | 30 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VLGA |
The DSC6101JE1B-030.0000: Unlike a quartz crystal, this is a complete oscillator — no external load capacitors or feedback resistors to match.
Typical supply current is 3 mA — low enough for always-on clocking in battery-backed systems. That is tight enough for CAN, LIN, UART, and most MCU clock trees, but not for precision RF or timekeeping where ±25 ppm or better is needed.
It is a standard XO with CMOS output at 30 MHz.