Skip to main content
Log in
Microchip Technology DSC6101JE1A-025.0000T — Crystals & Oscillators

Microchip DSC6101JE1A-025.0000T MEMS XO, 25 MHz, AEC-Q100

MPNDSC6101JE1A-025.0000T
Obsolete

Microchip Technology DSC61XX series XO (Standard) MEMS oscillator, 25 MHz, CMOS output, 4-VLGA, AEC-Q100, ±50ppm stability, 1.8V~3.3V supply.

Microchip Technology DSC6101JE1A-025.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6101JE1A-025.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC61XX
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply3mA (Typ)
Frequency25 MHz
Frequency stability±50ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

The DSC6101JE1A-025.0000T: It belongs to the DSC61XX series and carries the XO (Standard) type designation with an Enable/Disable function.

Maximum supply current is 3 mA typical, which keeps the thermal contribution negligible in a densely populated ECU. Frequency stability is specified at ±50 ppm, which is tight enough for CAN FD and Ethernet clocking in automotive networks where timing margin matters for bit-level synchronization.

Obsolete — sourcing through independent channels

For existing BOM lines that require this exact frequency and package, the part can be sourced through independent surplus and broker channels. Availability is lot-specific and confirmed at RFQ time. No pin-compatible direct replacement from Microchip is documented, so a board-level redesign may be needed if stock runs out.

Frequently asked questions

Where can I buy DSC6101JE1A-025.0000T?

Submit a request for a quote to check lot-specific stock.

What is the output type and frequency of DSC6101JE1A-025.0000T?

It outputs a 25 MHz CMOS clock signal. The output is a standard digital CMOS level, compatible with most microcontroller and FPGA clock inputs.

What automotive qualification does DSC6101JE1A-025.0000T carry?

It is rated AEC-Q100, which certifies the part for automotive-grade reliability and temperature stress testing per the Automotive Electronics Council standard.