Microchip Technology DSC61XXB series MEMS XO (Standard), 25 MHz, CMOS output, ±20 ppm stability, 1.8V~3.3V supply, AEC-Q100, 4-VFLGA package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 25 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VFLGA |
The DSC6101HL3B-025.0000T: Rated AEC-Q100, it spans -40°C to +105°C — the full automotive Grade 1 temperature band, meaning it can sit on an engine-control module or a transmission ECU without derating.
The base product number DSC6101 covers the full family, so a design locked to this order code has a stable supply path through authorized distribution.
It is a 25 MHz XO (Standard) with CMOS output. The CMOS rail-to-rail swing makes it a drop-in replacement for quartz oscillators in digital logic circuits.
Yes — the 1.6 mm x 1.2 mm 4-VFLGA has exposed pads on the bottom, but the pitch is wide enough for a fine-tip iron and flux if you pre-tin the board pads. A hot-air rework station is easier for consistent wetting.