Microchip Technology DSC61XX series XO (Standard), MEMS-based oscillator, 24 MHz, CMOS output, ±25 ppm, AEC-Q100, 4-SMD No Lead, 1.60mm x 1.20mm.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Bag |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6101HE2A-024.0000: A functionally equivalent MEMS XO in the same package with matching output type and supply voltage would require a board-level validation of pin compatibility and timing parameters.
This is useful for power-gating schemes in automotive ECU designs where the oscillator must be shut down during sleep modes.
This part is obsolete and sourced through independent distribution. No stock-holding claim is made.
The single-supply flexibility means it can clock 1.8V or 3.3V logic without a voltage translator on the output.
For CAN or LIN bus clocking this is adequate; for precision timing requiring better than ±10 ppm a TCXO or OCXO would be needed.