Microchip Technology DSC61XXB series MEMS XO (Standard), CMOS output, 4-VFLGA package, AEC-Q100 rated, 1.71V~3.63V supply, -40°C~125°C, ±20ppm stability, programmable 3.5 kHz~100 MHz.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XXB |
| Mounting | Surface Mount |
| Programmable type | Blank (User Must Program) |
| Voltage | 1.71V ~ 3.63V |
| Current - supply | 3mA (Typ) |
| Available frequency range | 3.5 kHz ~ 100 MHz |
| Frequency stability (Total) | ±20ppm |
| Operating temperature | -40°C~125°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Bag |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-VFLGA |
The DSC6101HA3B-PROG: Typical supply current is 3 mA, keeping the oscillator's draw low enough for battery-backed or always-on domains.
Surface-mount assembly with the standard LGA land pattern; the low profile suits mezzanine or card-edge designs where component height is constrained.
This is a blank (user-programmable) device — the frequency is set by the buyer using Microchip's programming tools and is not pre-configured at the factory.
Yes, it carries an AEC-Q100 rating, which qualifies it for automotive-grade applications requiring the stress and reliability screening defined by that standard.
It provides a CMOS output, the standard logic-level interface compatible with most digital ICs, microcontrollers, and FPGAs.