Microchip Technology DSC61XX series, XO (Standard) MEMS oscillator, 24 MHz, CMOS output, 1.8V–3.3V supply, ±50 ppm stability, AEC-Q100, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 24 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6101CI1A-024.0000: Typical supply current is 3 mA, making it suitable for power-sensitive designs where every milliamp counts — a battery-backed RTC or always-on clock domain stays within budget.
No pin-compatible direct replacement is listed, so a board spin or alternative MEMS oscillator from the same DSC61XX family may be required for new designs.
It is a 24 MHz XO (Standard) with CMOS output — a single-ended, logic-level clock signal compatible with most MCUs, FPGAs, and digital ICs.
The part carries an AEC-Q100 automotive qualification rating. Standard documentation includes the datasheet, RoHS/REACH compliance declarations, and the AEC-Q100 qualification report — all available from Microchip's document portal.