Microchip Technology DSC61XX series MEMS XO (Standard), 24 MHz, CMOS output, AEC-Q100 rated, ±25ppm stability, 1.8V~3.3V supply, 4-SMD package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6101CE2A-024.0000T is a MEMS-based oscillator (XO, Standard) delivering a 24 MHz CMOS clock output — a common frequency for MCU core timing, CAN controllers, and USB interfaces.
The oscillator draws 3 mA typical at full speed, so the thermal budget in a sealed module stays low. For a 24 MHz MCU clock, that drift is inside the tolerance for UART baud-rate generation and CAN bit timing; no external tuning capacitor or trim pot is needed.
Availability, date codes, and pricing confirmed at quote time — no stock-holding claim on this page.
AEC-Q100 is the automotive IC qualification standard covering temperature range, reliability stress, and PPAP. This part meets that grade, so it is suitable for automotive and other high-reliability applications where a consumer-grade oscillator would not pass qualification.
CMOS output — compatible with standard digital logic inputs without level translation.