Microchip Technology DSC61XX series XO (Standard) MEMS oscillator, 24 MHz, CMOS output, ±25 ppm stability, 1.8V-3.3V supply, 4-SMD no lead package, AEC-Q100 qualified.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC61XX |
| Mounting | Surface Mount |
| Voltage | 1.8V ~ 3.3V |
| Current - supply | 3mA (Typ) |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC6101CE2A-024.0000: Typical supply current is 3 mA — low enough for always-on clock domains in battery-backed systems, though not the sub-µA level of a dedicated RTC oscillator.
No pin-compatible drop-in replacement is documented by Microchip, so a BOM change or board spin is required for new production.
Microchip does not document a pin-compatible successor for this DSC61XX variant. The DSC61XX family shares the same 4-SMD no-lead footprint and supply voltage range, but a specific 24 MHz ±25 ppm AEC-Q100 XO with Enable/Disable function would need to be selected from the active DSC61XX lineup by verifying the exact stability and temperature grade.
The part carries AEC-Q100 qualification for automotive stress. RoHS and REACH compliance documentation is standard for Microchip's DSC61XX series, though specific certificates should be requested at RFQ for your lot.