Microchip Technology DSC60XXB series MEMS XO (Standard), 16 MHz, CMOS output, 4-VFLGA package, 1.8V ~ 3.3V supply, ±20ppm stability, AEC-Q100 rated.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 1.3mA (Typ) |
| Current - supply (Disable) | 1.5µA (Typ) |
| Frequency | 16 MHz |
| Frequency stability | ±20ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VFLGA |
The DSC6053HE3B-016.0000T: Frequency stability is specified at ±20 ppm, tight enough to clock CAN, Ethernet, or USB interfaces without additional tuning.
Active current draw is 1.3 mA typical at 16 MHz — low enough for battery-powered edge nodes where the oscillator runs continuously.
It is a 16 MHz MEMS XO (Standard) with CMOS output, typically used as a clock source for microcontrollers, CAN transceivers, Ethernet PHYs, or USB controllers in automotive and industrial electronics.
The DSC60XXB series includes multiple frequency and stability variants in the same 4-VFLGA package — for example, a 25 MHz or 50 MHz version with ±20 ppm stability shares the same footprint and pinout. The specific alternative depends on the required output frequency for the target application.