Microchip Technology DSC60XXB series XO (Standard), MEMS-based, 4-VLGA package, dual output 10MHz & 20MHz, CMOS, ±25ppm stability, 1.8V~3.3V supply, -40°C~85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XXB |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 1.3mA (Typ) |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 10MHz, 20MHz |
| Operating temperature | -40°C ~ 85°C |
| Height | 0.035\" (0.89mm) |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Base resonator | MEMS |
| Case | 4-VLGA |
The DSC6021JI2B-01VBT: Maximum current draw is 1.3 mA typical across both outputs running — low enough that a 100 mA LDO can power the oscillator plus several other low-power ICs from the same rail without derating.
The 4-VLGA package (0.89 mm seated height) is a land-grid array with four pads — no through-holes, so the backside of the board stays clear for passives on the opposite layer.
The type is XO (Standard) — a MEMS-based oscillator that generates a fixed-frequency clock without requiring an external quartz crystal.
The DSC60XXB series shares the same package and supply range, but output frequency combinations vary by order code — confirm the exact frequencies before substituting.
Microchip provides RoHS and REACH compliance documentation for the DSC60XXB series. The part is lead-free and halogen-free per the standard Microchip material declaration.