Microchip Technology DSC60XX series, XO (Standard), MEMS-based, dual-output 25 MHz + 50 MHz CMOS, 4-VLGA package, 1.71V–3.63V supply, ±25ppm stability, -40°C to +85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XX |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 1.3mA (Typ) |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 25Mhz, 50MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.89mm) |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Base resonator | MEMS |
| Case | 4-VLGA |
The DSC6021JI2A-009TT: The CMOS output is single-ended and directly drives the clock input of a downstream device without external termination resistors — the 1.3 mA max supply current reflects the low drive strength, so the trace length to the load should stay under 50 mm to avoid signal-integrity issues at 50 MHz.
The DSC60XX series includes other dual-output MEMS oscillators, but pin compatibility and frequency combinations must be verified against the specific BOM position. A board spin may be required for a replacement.