Microchip Technology DSC60XX series MEMS XO (Standard), DSC6021CI2A-009WT, dual output 25 MHz & 27 MHz, CMOS, ±25 ppm, 1.71 V–3.63 V, -40 °C–85 °C, 4-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XX |
| Supply voltage | 1.71V ~ 3.63V |
| Current - supply | 1.3mA (Typ) |
| Frequency stability | ±25ppm |
| Frequency - output 1 | 25MHz, 27MHz |
| Operating temperature | -40°C~85°C |
| Height | 0.035\" (0.90mm) |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Output | CMOS |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Base resonator | MEMS |
| Case | 4-VDFN |
The DSC6021CI2A-009WT: Typical current draw is 1.3 mA — low enough for battery-backed or always-on subsystems where every milliwatt counts.
No official successor order code is listed. The MEMS-based design and dual-frequency output are not pin-compatible with a standard single-frequency quartz XO — a board spin would be needed if a drop-in replacement is sought.
Microchip has not listed an official pin-compatible successor for this order code.