Microchip Technology DSC60XXB series MEMS XO (Standard), DSC6013HI2B-024.0000, 24 MHz, CMOS output, ±25 ppm stability, AEC-Q100, 4-VFLGA package, 1.8V~3.3V supply, -40°C~85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 1.3mA (Typ) |
| Current - supply (Disable) | 1.5µA (Typ) |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Bag |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VFLGA |
The DSC6013HI2B-024.0000: For a 24 MHz clock, that is a maximum drift of ±600 Hz — tight enough for CAN (which tolerates ~1.5% bit-time error) and most UART/USART baud-rate generators. The -40°C low end covers cold-crank conditions in automotive; the +85°C ceiling suits cabin and under-hood ambient but not exhaust-adjacent locations.
The small footprint frees board area on dense ECU or sensor-node layouts.
Submit a request for the quantity and target lead time.