Skip to main content
Log in
Microchip Technology DSC6013HI2A-PROGRAMMABLE — Crystals & Oscillators

Microchip DSC6013HI2A-PROGRAMMABLE MEMS XO, 1-80MHz, CMOS

MPNDSC6013HI2A-PROGRAMMABLE
Obsolete

Microchip Technology DSC60XX series, XO (Standard) MEMS oscillator, DSC6013HI2A-PROGRAMMABLE, 1 MHz ~ 80 MHz, CMOS output, 1.71V ~ 3.63V, AEC-Q100, 4-SMD No Lead.

Microchip Technology DSC6013HI2A-PROGRAMMABLE datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6013HI2A-PROGRAMMABLE specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Current - supply (Disable)12 µA
Available frequency range1 MHz ~ 80 MHz
Frequency stability (Total)±25ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.063\" L x 0.047\" W (1.60mm x 1.20mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageBulk
RatingsAEC-Q100
FunctionStandby
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Obsolete MEMS XO — sourcing through surplus channels

Microchip has marked the DSC6013HI2A-PROGRAMMABLE as Obsolete. No official successor is listed, so the only channel for this exact order code is the independent surplus market — lot-specific inventory confirmed at RFQ, not a franchised production pipeline.

1.71–3.63 V supply, 1.3 mA typical draw

A standby function drops the disable current to 12 µA, preserving coin-cell life in always-on automotive or IoT applications.

Programmable 1–80 MHz with ±25 ppm total stability

The available frequency range spans 1 MHz to 80 MHz, programmable via Microchip's factory or in-system configuration tools.

Frequently asked questions

What is the closest pin-compatible alternative to DSC6013HI2A-PROGRAMMABLE?

No official pin-compatible successor is listed by Microchip. The DSC60XX family shares the same 4-SMD no-lead footprint and 1.71–3.63 V supply range, but each order code is factory-programmed to a specific frequency. A direct replacement requires matching the output frequency, stability grade, and AEC-Q100 rating. Contact us with your target frequency for cross-reference assistance.