Skip to main content
Log in
Microchip Technology DSC6013HI2A-012.0000T — Crystals & Oscillators

DSC6013HI2A-012.0000T MEMS XO, 12 MHz, CMOS, AEC-Q100

MPNDSC6013HI2A-012.0000T
Obsolete

Microchip Technology DSC60XX series MEMS XO (Standard), 12 MHz, CMOS output, ±25ppm stability, 1.71V~3.63V supply, AEC-Q100, 4-SMD No Lead 1.60mm x 1.20mm, Tape & Reel.

Microchip Technology DSC6013HI2A-012.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6013HI2A-012.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Frequency12 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.063\" L x 0.047\" W (1.60mm x 1.20mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC6013HI2A-012.0000T is officially marked obsolete (EOL) by Microchip Technology. Sourced through independent distribution channels against an RFQ — availability and pricing confirmed at quote time, lot-specific.

12 MHz MEMS XO with AEC-Q100 qualification

Rated AEC-Q100, the part is qualified for automotive-grade temperature and reliability stress — suitable for under-hood or chassis-mounted ECUs where a standard crystal might fail under mechanical shock.

Supply range, stability, and power budget

Includes a Standby (Power Down) function — pulling the enable pin low drops the output to high-Z and cuts supply current to near zero, useful for power-gated sensor nodes or CAN transceivers.

Package and board footprint

Supplied on Tape & Reel (TR) for automated pick-and-place assembly — no hand-solder prototype units in this reel format.

Frequently asked questions

What is the output type and frequency of DSC6013HI2A-012.0000T?

CMOS output at 12 MHz. The part is a standard XO (oscillator) with a MEMS resonator, not a quartz crystal — the output is a full-swing CMOS clock signal, not a crystal's sine wave.

What compliance documentation does Microchip provide for this part?

As an AEC-Q100 qualified device, the part meets automotive-grade reliability screening.