Skip to main content
Log in
Microchip Technology DSC6011JE1B-003.5800T — Crystals & Oscillators

DSC6011JE1B-003.5800T MEMS XO – 3.58 MHz CMOS, Standby

MPNDSC6011JE1B-003.5800T
Active

Microchip DSC60XXB series XO (Standard), MEMS-based, 3.58 MHz CMOS output, 1.71V–3.63V supply, ±50 ppm stability, standby (power-down) function, -20°C to +70°C, 4-VLGA package.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6011JE1B-003.5800T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Voltage1.71V ~ 3.63V
Current - supply (Disable)1.5µA (Typ)
Frequency3.58 MHz
Frequency stability±50ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-VLGA

Product details

MEMS XO for low-speed clock domains

The DSC6011JE1B-003.5800T is a MEMS-based XO (Standard) from Microchip's DSC60XXB series, delivering a fixed 3.58 MHz CMOS output. The MEMS resonator eliminates the quartz-crystal start-up time and shock sensitivity — useful when the clock must be stable immediately after power-on, such as for a UART boot loader or a low-speed MCU peripheral clock.

The wide supply range of 1.71V to 3.63V lets this oscillator run directly off a 1.8V or 3.3V rail without an intermediate LDO — one less component on the BOM.

The 4-VLGA package measures 2.50 mm x 2.00 mm with a seated height of 0.89 mm, fitting tight PCB stacks in portable or space-constrained designs.

Microchip lists the DSC6011JE1B-003.5800T as Active. No last-time-buy or end-of-life notice has been issued. The part can be designed in today without a forced migration window.

Frequently asked questions

Where can I buy DSC6011JE1B-003.5800T?

This part is sourced through independent distribution and quoted to order against your BOM quantity. Submit an RFQ for current availability and pricing — no stock-holding claim is made here.

Does DSC6011JE1B-003.5800T have a standby power-down feature?

Yes. The standby (power-down) function is listed, and the disable current is 1.5 µA typical — low enough for battery-backed always-on domains.

What is the frequency stability of DSC6011JE1B-003.5800T?

Frequency stability is ±50 ppm over the operating temperature range. This is adequate for UART baud-rate generation and general-purpose clocking but not for precision RF or Ethernet timing.