The DSC6011JA2B-075K000T: In a battery-backed ECU this lets the system controller gate the clock tree without a separate load switch. Active current is 1.3 mA typ at 75 kHz — the MEMS drive stage draws less than a comparable quartz oscillator at this frequency, which matters for always-on sensor nodes or CAN transceiver wake circuits.
Microchip DSC6011JA2B-075K000T MEMS XO, 75 kHz, AEC-Q100
MPNDSC6011JA2B-075K000T
Active
Microchip Technology DSC60XXB series MEMS XO (Standard), DSC6011JA2B-075K000T, 75 kHz, CMOS output, 4-VLGA package, Tape & Reel, AEC-Q100 qualified.
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 1.3mA (Typ) |
| Current - supply (Disable) | 1.5µA (Typ) |
| Frequency | 75 kHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C ~ 125°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VLGA |
Product details
Frequently asked questions
Is DSC6011JA2B-075K000T AEC-Q100 qualified and suitable for automotive use?
Yes, the DSC6011JA2B-075K000T carries AEC-Q100 qualification.
Does DSC6011JA2B-075K000T have a direct equivalent or replacement if stock is low?
The DSC60XXB series shares the same 4-VLGA footprint and supply range, but a different order code means a different programmed frequency or stability grade — verify the BOM position before substituting.