Microchip Technology DSC60XXB series MEMS XO (Standard), 10 MHz, CMOS output, 1.8V ~ 3.3V supply, ±25 ppm stability, AEC-Q100, 4-VFLGA package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC60XXB |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 1.3mA (Typ) |
| Current - supply (Disable) | 1.5µA (Typ) |
| Frequency | 10 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.063\" L x 0.047\" W (1.60mm x 1.20mm) |
| Height - seated | 0.035\" (0.89mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VFLGA |
The DSC6011HI2B-010.0000T: This standby current is low enough that a battery-backed RTC domain can keep the oscillator off until a wake event, preserving the coin cell's service life in telematics or keyless-entry modules.
The surface-mount package is supplied on Tape & Reel, consistent with high-volume pick-and-place assembly for automotive ECU lines.
The 'B' suffix indicates a different revision or ordering code within the same DSC60XXB family. Both share the same 10 MHz frequency, CMOS output, and 4-VFLGA package, but the 'B' variant carries the AEC-Q100 automotive rating — verify the temperature grade and supply voltage match your design before substituting.