Skip to main content
Log in
Microchip Technology DSC6011HI2B-008.0000T — Crystals & Oscillators

Microchip DSC6011HI2B-008.0000T MEMS XO, 8 MHz, AEC-Q100

MPNDSC6011HI2B-008.0000T
Active

Microchip Technology DSC60XXB series MEMS XO (Standard), 8 MHz, CMOS output, ±25 ppm stability, 1.8V ~ 3.3V supply, 4-VFLGA package, AEC-Q100 qualified.

Microchip Technology DSC6011HI2B-008.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6011HI2B-008.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply1.3mA (Typ)
Current - supply (Disable)1.5µA (Typ)
Frequency8 MHz
Frequency stability±25ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.063\" L x 0.047\" W (1.60mm x 1.20mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-VFLGA

Product details

The DSC6011HI2B-008.0000T: What AEC-Q grade, exactly? The datasheet confirms AEC-Q100 qualification — this is not a commercial-grade part dressed up as automotive-capable. The OEM auditor will ask for PPAP documentation, and this part carries the grade to back it up.

Supply range and power budget for low-power rails

For a battery-backed ECU module that sleeps between ignition cycles, the 1.5 µA standby draw adds negligible drain — the oscillator's quiescent current sits well below the module's own leakage budget.

Active production and sourcing posture

No stock-holding claim — quoted per RFQ.

Frequently asked questions

Is DSC6011HI2B-008.0000T obsolete or end-of-life?

No — the manufacturer's lifecycle record shows the product status as Active. No end-of-life notice, last-time-buy, or NRND designation is on file.

How to enable standby mode on DSC6011HI2B?

The standby mode is activated via the dedicated pin — consult the DSC60XXB datasheet for the specific logic level and timing sequence.