Skip to main content
Log in
Microchip Technology DSC6011HI2B-005.0000 — Crystals & Oscillators

DSC6011HI2B-005.0000 – Microchip MEMS XO, 5 MHz, AEC-Q100

MPNDSC6011HI2B-005.0000
Active

Microchip DSC6011HI2B-005.0000 — XO (Standard), 5 MHz, CMOS output, ±25 ppm stability, AEC-Q100, 4-VFLGA, 1.8V–3.3V supply, -40 to +85 °C.

Microchip Technology DSC6011HI2B-005.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6011HI2B-005.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply1.3mA (Typ)
Current - supply (Disable)1.5µA (Typ)
Frequency5 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.063\" L x 0.047\" W (1.60mm x 1.20mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageBag
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-VFLGA

Product details

Automotive-grade MEMS clock source

The DSC6011HI2B-005.0000 is an AEC-Q100 qualified MEMS-based XO delivering a 5 MHz CMOS clock output across the full -40 to +85 °C temperature range — suitable for under-hood and cabin automotive modules where a quartz crystal would require additional screening or a separate can.

Housed in a 4-pad VFLGA measuring 1.60 mm x 1.20 mm with a seated height of 0.89 mm, this oscillator fits space-constrained PCBs — the 0.50 mm pitch LGA footprint requires careful fan-out but saves board area compared to a larger SMD crystal.

Power profile and standby function

Typical active current is 1.3 mA at 5 MHz, and the standby (power-down) mode drops supply draw to 1.5 µA typ — the part can be gated off in a battery-backed automotive ECU when the module is asleep, preserving the battery reserve.

Frequently asked questions

Is DSC6011HI2B-005.0000 suitable for automotive applications?

Yes — it is AEC-Q100 qualified, meaning it has passed the automotive-grade reliability stress tests (temperature cycling, ESD, latch-up) per the AEC-Q100 specification. The -40 to +85 °C operating range covers cabin and most under-hood locations, but verify the module's worst-case ambient against Grade 1 (125 °C) if deployed near the engine block.

Can DSC6011HI2B-005.0000 operate at a 5V supply?

No — the supply voltage range is 1.8V to 3.3V. A 5V rail will exceed the absolute maximum rating and damage the device. If your system uses a 5V supply, you need a level translator or a different oscillator rated for 5V.

What is the frequency stability of DSC6011HI2B-005.0000?

±25 ppm over the -40 to +85 °C operating range. This includes initial tolerance, temperature drift, and aging — sufficient for most MCU clocking and basic serial communication without external capacitors or trim.

Can DSC6011HI2B-005.0000 replace a standard crystal oscillator?

It can replace a crystal-based XO in a 5 MHz CMOS application if the PCB footprint accepts a 1.60 mm x 1.20 mm 4-VFLGA package. The MEMS resonator eliminates the need for external load capacitors and is more shock/vibration tolerant than a quartz crystal. However, the supply voltage must be within 1.8V–3.3V and the output is CMOS, not sine wave — check the receiver's input threshold compatibility.