Supply, stability, and power budget
The DSC6011CE1A-000.0000T: Total frequency stability is ±50 ppm across the temperature band, which keeps the clock edge within budget for a 100BASE-T1 or CAN-FD controller that needs tighter than 100 ppm total tolerance. Active current draw is 1.3 mA typical; the standby function drops it to 12 µA max when the output is disabled. For a module that sleeps between ignition cycles, the standby current is below the self-discharge rate of a coin-cell backup.
Surface-mount reflow follows the JEDEC profile for leadless ceramic packages.
Microchip has marked the DSC6011CE1A-000.0000T as Obsolete. For a BOM that already carries this line, the blank-programmable nature means the programmed frequency is set at the factory — verify the programmed frequency matches your requirement before committing to a surplus lot.