Skip to main content
Log in
Microchip Technology DSC6003MI3B-026.0000 — Crystals & Oscillators

DSC6003MI3B-026.0000 MEMS XO – 26 MHz, AEC-Q100, CMOS

MPNDSC6003MI3B-026.0000
Active

Microchip DSC60XXB series, XO (Standard) MEMS oscillator, 26 MHz CMOS output, AEC-Q100 qualified, ±20 ppm stability, 1.71–3.63 V supply, 4-VFLGA package

Microchip Technology DSC6003MI3B-026.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6003MI3B-026.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Frequency26 MHz
Frequency stability±20ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.079\" L x 0.063\" W (2.00mm x 1.60mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageBag
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VFLGA

Product details

26 MHz automotive-grade MEMS clock reference

The DSC6003MI3B-026.0000 is a 26 MHz MEMS-based XO from Microchip's DSC60XXB series, delivering a CMOS output with ±20 ppm frequency stability across the full -40°C to +85°C industrial range.

The 1.71V to 3.63V supply range lets this oscillator run off a 1.8V or 3.3V rail without a dedicated LDO — one less component in the power tree. Typical current draw is 1.3 mA, which keeps the thermal contribution negligible in a densely populated ECU board.

Housed in a 4-VFLGA package measuring 2.00 mm x 1.60 mm with a seated height of 0.89 mm, this oscillator fits tight layout zones. The 4-pin land-grid array requires a solder-paste stencil with aperture matching the datasheet's recommended footprint — typical for MEMS oscillators in this form factor.

Microchip has not published a successor for this DSC60XXB series member.

Frequently asked questions

Is the DSC6003MI3B-026.0000 AEC-Q100 qualified?

Yes, the DSC6003MI3B-026.0000 carries AEC-Q100 qualification, covering the -40°C to +85°C operating temperature range. This means it meets automotive-grade reliability stress and PPAP requirements for under-hood and cabin applications.