Skip to main content
Log in
Microchip Technology DSC6003MI2B-014.0000 — Crystals & Oscillators

DSC6003MI2B-014.0000 MEMS XO – 14 MHz CMOS, AEC-Q100, Active

MPNDSC6003MI2B-014.0000
Active

Microchip DSC60XX series MEMS XO, 14 MHz, CMOS output, ±25 ppm stability, 1.71-3.63 V supply, AEC-Q100, 4-VFLGA package

Microchip Technology DSC6003MI2B-014.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6003MI2B-014.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Frequency14 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.079\" L x 0.063\" W (2.00mm x 1.60mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageBag
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VFLGA

Product details

The DSC6003MI2B-014.0000 is a 14 MHz MEMS-based XO (Standard) with CMOS output, built on Microchip's DSC60XX platform. AEC-Q100 qualified and rated for -40 to 85°C, this oscillator fits automotive domains like body controllers, infotainment, and ADAS sensor modules that require a qualified clock source. The 1.71-3.63 V supply range lets it run directly from a 1.8 V or 3.3 V rail without an extra LDO.

Housed in a 4-VFLGA (2.00 x 1.60 mm) with a seated height of 0.89 mm, this is a small-outline surface-mount oscillator. The 4-pin LGA footprint is common across the DSC60XX family — layout reuse between frequency variants is straightforward. Supply current is 1.3 mA typical at 14 MHz — low enough for battery-backed RTC or always-on sensor interface modules where every milliamp counts.

Product status is Active.

Frequently asked questions

Is DSC6003MI2B-014.0000 AEC-Q100 qualified?

Yes, it carries AEC-Q100 rating. This qualifies it for automotive-grade applications including under-hood and cabin electronics where standard commercial XOs are not accepted.

Can DSC6003MI2B-014.0000 replace a standard quartz oscillator?

Functionally yes — it is a drop-in XO replacement with CMOS output. The MEMS resonator offers better shock and vibration tolerance than quartz, which is an advantage in automotive and industrial environments. Pin-compatible with other DSC60XX 4-pin LGA parts, but verify the footprint matches your board's oscillator pattern.

Is DSC6003MI2B-014.0000 compatible with 1.8V logic?

Yes. The supply voltage range is 1.71-3.63 V, so it operates directly from a 1.8 V rail. The CMOS output swings rail-to-rail, which is compatible with 1.8 V logic families.