Skip to main content
Log in
Microchip Technology DSC6003JI2A-000.0000T — Crystals & Oscillators

DSC6003JI2A-000.0000T Microchip XO MEMS Oscillator Obsolete

MPNDSC6003JI2A-000.0000T
Obsolete

Microchip Technology DSC60XX series, XO (Standard) MEMS oscillator, CMOS output, 4-SMD no-lead package, AEC-Q100 qualified, -40°C to 85°C operating range, 1.71 V to 3.63 V supply.

Microchip Technology DSC6003JI2A-000.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6003JI2A-000.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Programmable typeBlank (User Must Program)
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Available frequency range1 MHz ~ 80 MHz
Frequency stability (Total)±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-SMD, No Lead

Product details

AEC-Q100 qualified MEMS oscillator

This XO (Standard) oscillator uses a MEMS base resonator and outputs a CMOS clock signal. The supply voltage spans 1.71 V to 3.63 V, covering common 1.8 V, 2.5 V, and 3.3 V logic rails without an external regulator.

Blank — user must program frequency

The device ships as a Blank (User Must Program) part. The output frequency is not set at the factory; the buyer must program the desired frequency within the 1 MHz to 80 MHz range before the oscillator can be used in-circuit.

Frequently asked questions

Does the DSC6003JI2A-000.0000T require programming?

Yes. The part ships as a Blank (User Must Program) device. The output frequency must be programmed by the user within the 1 MHz to 80 MHz range before the oscillator can generate a clock signal.