Skip to main content
Log in
Microchip Technology DSC6003JE1A-000.0000 — Crystals & Oscillators

DSC6003JE1A-000.0000 MEMS XO, AEC-Q100

MPNDSC6003JE1A-000.0000
Obsolete

Microchip DSC60XX series MEMS XO, CMOS output, 1.71V–3.63V supply, AEC-Q100 qualified, blank (user-programmable), 4-SMD no-lead package, 2.50mm x 2.00mm

$0.8200Ref. price · indicative, final on quote
Microchip Technology DSC6003JE1A-000.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6003JE1A-000.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Programmable typeBlank (User Must Program)
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Available frequency range1 MHz ~ 80 MHz
Frequency stability (Total)±50ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC6003JE1A-000.0000 is a MEMS-based XO (standard oscillator) from Microchip's DSC60XX series, delivering a CMOS output across a 1 MHz to 80 MHz frequency range. The part is supplied as a blank device (user must program the frequency), so it arrives without a fixed output frequency.

Obsolete – sourcing and lifecycle reality

No last-time-buy window remains – the discontinuation is final.

Operating from 1.71 V to 3.63 V, the oscillator covers the common 1.8 V, 2.5 V, and 3.3 V logic rails without an external regulator.

Frequently asked questions

What is the replacement for the DSC6003JE1A-000.0000?

Microchip has not published an official successor for the DSC6003JE1A-000.0000 within the DSC60XX series. For a pin-compatible MEMS oscillator with AEC-Q100 qualification, evaluate the DSC60XX family's active variants (e.g., DSC6001 or DSC6011 series) – confirm the package (4-SMD, 2.50mm x 2.00mm) and supply voltage range match your layout. A board spin may be required if no exact drop-in exists.

Does the DSC6003JE1A-000.0000 require programming?

Yes. The device is supplied as a blank (user must program) unit. The frequency is set by the user via Microchip's programming tool or factory-programming service. Budget for programming time and equipment if you are not using a pre-programmed variant.