Active production, AEC-Q100 qualified MEMS oscillator
The DSC6001ME1B-075.0000T is an active-production MEMS-based XO (Standard) from Microchip's DSC60XXB series, delivering a 75 MHz CMOS output with ±50ppm frequency stability across the full operating range. The wide supply voltage range of 1.71V to 3.63V lets it run from a single 1.8V, 2.5V, or 3.3V rail without a separate regulator, simplifying the power tree on mixed-voltage boards.
Package, footprint, and board-level fit
Housed in a 4-VFLGA package measuring 2.00mm x 1.60mm with a seated height of 0.89mm, this oscillator fits tight layout constraints common in automotive ECU and ADAS camera modules. Surface-mount with a 4-pad LGA footprint — the small body means the decoupling cap should sit within 2 mm of the VDD pin to keep the supply clean at 75 MHz.
Typical current draw is 1.3 mA, making it suitable for always-on clocking in battery-backed systems like telematics or keyless entry modules.
Listed as Active — no NRND or EOL flags. The base product number DSC6001 covers a family of frequencies and stabilities, so a BOM change to a different frequency within the family keeps the same footprint.