Skip to main content
Log in
Microchip Technology DSC6001JI1B-016.0000 — Crystals & Oscillators

DSC6001JI1B-016.0000 MEMS Oscillator – Microchip, AEC-Q100

MPNDSC6001JI1B-016.0000
Active

Microchip DSC6001JI1B-016.0000, MEMS-based XO (Standard), 16 MHz CMOS output, AEC-Q100 qualified, 1.8V–3.3V supply, ±50 ppm stability, -40°C to 85°C, 4-VLGA package.

Microchip Technology DSC6001JI1B-016.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6001JI1B-016.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply1.3mA (Typ)
Frequency16 MHz
Frequency stability±50ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

Selection mistake this part avoids

A quartz crystal oscillator in an automotive ECU often requires a separate load-capacitance calculation and can suffer from vibration-induced frequency shifts. The DSC6001JI1B-016.0000 uses a MEMS resonator instead, delivering a fixed 16 MHz CMOS output without external tuning components.

A single oscillator can serve a 1.8V MCU core, a 2.5V FPGA bank, or a 3.3V peripheral bus without a level translator.

Power budget and enable control

In a battery-backed RTC or always-on sensor node, that difference extends standby time measurably. The disable state draws near-zero current from the supply rail.

The 4-VLGA package measures 2.50 mm × 2.00 mm with a seated height of 0.89 mm. This is a standard 4-pin land-grid array — the PCB footprint matches many 2.5×2.0 mm MEMS oscillators from other vendors, simplifying second-sourcing.

Lifecycle and procurement

Microchip lists no direct successor — this is the current design-in part for the DSC60XXB series.

Frequently asked questions

Is DSC6001JI1B-016.0000 AEC-Q100 qualified?

Yes, it carries AEC-Q100 qualification, which covers the temperature grade, reliability stress, and PPAP requirements for automotive applications.

Can DSC6001JI1B-016.0000 replace a quartz crystal oscillator?

Yes, it is a direct functional replacement for a 16 MHz quartz crystal oscillator in most MCU clock circuits. The MEMS resonator eliminates the need for external load capacitors and is more resistant to vibration and shock. The output is CMOS, so it drives the clock input of a microcontroller or SoC directly.

What is the frequency stability of DSC6001JI1B-016.0000?

Frequency stability is ±50 ppm over the full operating temperature range and supply voltage variation. This is typical for a MEMS oscillator and sufficient for most MCU clocking, USB full-speed, and CAN bus applications.