Skip to main content
Log in
Microchip Technology DSC6001JI1B-010.0000T — Crystals & Oscillators

DSC6001JI1B-010.0000T MEMS XO – 10 MHz, AEC-Q100, CMOS

MPNDSC6001JI1B-010.0000T
Active

Microchip Technology DSC60XXB series, XO (Standard) MEMS oscillator, 10 MHz CMOS output, AEC-Q100 qualified, 4-VLGA package, -40 to +85 °C, ±50 ppm stability

Microchip Technology DSC6001JI1B-010.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6001JI1B-010.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Frequency10 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

Automotive-grade MEMS clock source for 10 MHz rails

The DSC6001JI1B-010.0000T is a 10 MHz MEMS-based XO (Standard) from Microchip's DSC60XXB series, delivering a CMOS output from a 1.71 V to 3.63 V supply while drawing 1.3 mA typical.

Frequency stability and supply flexibility for bus timing

The 1.71-3.63 V supply range lets the oscillator run directly from a 1.8 V or 3.3 V rail without an extra LDO, saving a regulator and its dropout voltage headroom in a space-constrained ECU.

Available in Tape & Reel (TR) packaging in the 4-VLGA case measuring 2.50 mm x 2.00 mm with a seated height of 0.89 mm — a standard footprint for automated assembly lines. Confirm availability and current pricing at RFQ.

Frequently asked questions

Is the DSC6001JI1B-010.0000T AEC-Q100 qualified?

Yes — the DSC6001JI1B-010.0000T carries AEC-Q100 rating, meaning it has passed automotive-grade reliability stress tests including temperature cycling, ESD, and latch-up immunity per the AEC-Q100 specification. This qualifies it for under-hood and cabin electronics where standard commercial oscillators are not accepted.

Can the DSC6001JI1B-010.0000T replace a quartz oscillator in my design?

Yes — the DSC6001JI1B-010.0000T is a drop-in functional replacement for a 10 MHz quartz XO in the same 4-VLGA footprint, with the advantage of a MEMS resonator that eliminates quartz aging drift and is more robust to vibration and shock. Verify the supply voltage range (1.71-3.63 V,) and output type (CMOS,) match your existing oscillator's specifications before committing.

What is the difference between the DSC6001JI1B and DSC6001HI1B?

The difference lies in the frequency stability and operating temperature grade. The DSC6001JI1B variant (this part) is specified for -40 to +85 °C with ±50 ppm stability. The DSC6001HI1B typically targets a wider temperature range or tighter stability — consult the DSC60XXB datasheet for the exact HI1B specifications. For most automotive body and cabin applications, the JI1B grade provides sufficient margin.