Skip to main content
Log in
Microchip Technology DSC6001JI1A-000.0000 — Crystals & Oscillators

DSC6001JI1A-000.0000 MEMS XO, CMOS, AEC-Q100

MPNDSC6001JI1A-000.0000
Obsolete

Microchip DSC60XX series, XO (Standard), MEMS resonator, CMOS output, 1.71V–3.63V supply, -40°C–85°C, AEC-Q100, blank programmable, 4-SMD no-lead package

$7.5000Ref. price · indicative, final on quote
Microchip Technology DSC6001JI1A-000.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6001JI1A-000.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Programmable typeBlank (User Must Program)
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Current - supply (Disable)12 µA
Available frequency range1 MHz ~ 80 MHz
Frequency stability (Total)±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-SMD, No Lead

Product details

No pin-compatible direct replacement from Microchip is documented; a board spin may be required for a functional alternative.

The 1.71V–3.63V supply range allows it to run from a 1.8V or 3.3V rail without an external regulator.

Blank programmable – factory or user programming required

The DSC6001JI1A-000.0000 ships as a blank device — the frequency is not set at the factory. The user must program it via Microchip's programming tools before assembly. This adds a step to the BOM flow: budget for programming time and equipment, or order pre-programmed variants from Microchip if available.

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.89 mm max. The small footprint suits space-constrained automotive modules.

Frequently asked questions

Is the DSC6001JI1A-000.0000 obsolete?

Yes, Microchip lists the DSC6001JI1A-000.0000 as Obsolete. No official successor is documented. For existing designs, source through independent surplus channels; quantities are lot-specific and confirmed at RFQ.

What is the replacement for the DSC6001JI1A-000.0000?

No pin-compatible direct replacement is listed by Microchip. A board-level redesign may be needed to use a different oscillator. Check the DSC60XX series for other variants, or evaluate a standard quartz XO with the same footprint and supply voltage.

Is the DSC6001JI1A-000.0000 AEC-Q100 qualified?

Yes, the device carries an AEC-Q100 rating, qualifying it for automotive applications across the -40°C to +85°C temperature range. This covers under-hood and cabin environments where reliability stress testing is required.