Skip to main content
Log in
Microchip Technology DSC6001JE3B-024.0000T — Crystals & Oscillators

DSC6001JE3B-024.0000T MEMS XO 24 MHz CMOS AEC-Q100

MPNDSC6001JE3B-024.0000T
Active

Microchip DSC6001JE3B-024.0000T, XO (Standard), 24 MHz, CMOS output, ±20 ppm stability, AEC-Q100 qualified, 4-VLGA package

Microchip Technology DSC6001JE3B-024.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6001JE3B-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Frequency24 MHz
Frequency stability±20ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

The DSC6001JE3B-024.0000T is a 24 MHz MEMS-based XO (Standard) from Microchip's DSC60XXB series, delivering a CMOS output with ±20 ppm frequency stability across -20°C to +70°C. The 1.71V to 3.63V supply range lets it run directly off a 1.8V or 3.3V rail without an external regulator, and the Enable/Disable function allows the system to gate the clock for power savings.

Package footprint and board-fit note

Housed in a 4-VLGA package measuring 2.50mm x 2.00mm with a seated height of 0.89mm, this is a standard 4-pin oscillator footprint — it drops onto the same PCB land pattern as a quartz crystal oscillator, so a layout designed for a 4-pin 2.5x2.0mm crystal can accept this MEMS part without a board spin.

Frequently asked questions

Does DSC6001JE3B-024.0000T meet AEC-Q100 automotive qualification?

Yes, it is rated AEC-Q100, which covers the temperature grade, reliability stress, and PPAP requirements for automotive ICs. This qualifies it for under-hood and cabin-domain electronics within its -20°C to +70°C operating range.

What is DSC6001JE3B-024.0000T's listed type and output?

The type is XO (Standard) and the output is CMOS. This means it provides a standard square-wave clock signal compatible with most digital logic families without additional level shifting.