Skip to main content
Log in
Microchip Technology DSC6001JE2B-024.0000 — Crystals & Oscillators

DSC6001JE2B-024.0000 MEMS Oscillator – 24 MHz, AEC-Q100

MPNDSC6001JE2B-024.0000
Active

Microchip Technology DSC6001JE2B-024.0000, XO (Standard) MEMS oscillator, 24 MHz CMOS output, 1.71V–3.63V supply, ±25 ppm stability, AEC-Q100 qualified, 4-VLGA package.

Microchip Technology DSC6001JE2B-024.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6001JE2B-024.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Frequency24 MHz
Frequency stability±25ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA

Product details

Automotive-grade MEMS clock source for 24 MHz rails

The DSC6001JE2B-024.0000: This is a 24 MHz MEMS-based XO (Standard) from Microchip's DSC60XXB series, delivering CMOS output across a 1.71V to 3.63V supply range.

Supply voltage and frequency stability for BOM fit

The 1.71V–3.63V supply range means this oscillator can run on a 1.8V, 2.5V, or 3.3V rail without a separate regulator — one less line item in the BOM.

Package and board layout for the 4-VLGA footprint

Housed in a 4-VLGA package measuring 2.50 mm x 2.00 mm with a seated height of 0.89 mm. The 4-pin land-grid array is a small footprint — keep the decoupling capacitor within 2 mm of the supply pin to maintain clean clock edges.

The DSC6001JE2B-024.0000 is a current-design part suitable for new builds.

Frequently asked questions

Is the DSC6001JE2B-024.0000 AEC-Q100 qualified?

Yes, it carries an AEC-Q100 rating, making it suitable for automotive applications including under-hood and cabin electronics. The MEMS resonator provides better shock and vibration tolerance than a quartz crystal in those environments.

What is the difference between the DSC6001JE2B-024.0000 and the DSC6001HI2B-024.0000?

The difference is in the operating temperature range and frequency stability grade. The JE2B variant (this part) is rated -20°C to 70°C with ±25 ppm stability. The HI2B variant typically offers a wider industrial temperature range and tighter stability — confirm the exact suffix for your thermal requirements.

Can the DSC6001JE2B-024.0000 replace a quartz oscillator of the same frequency?

Yes, for a 24 MHz CMOS clock, this MEMS oscillator is a drop-in replacement for a quartz XO in the same 4-VLGA footprint. The MEMS resonator offers faster startup, better jitter performance, and higher shock resistance. Ensure the supply voltage (1.71V–3.63V) and enable polarity match your existing circuit.