Skip to main content
Microchip Technology DSC6001JE1B-024.0000T — Crystals & Oscillators

DSC6001JE1B-024.0000T MEMS Oscillator 24 MHz AEC-Q100

MPNDSC6001JE1B-024.0000T
Active

Microchip DSC60XXB series XO (Standard), 24 MHz, CMOS output, 1.8V~3.3V supply, AEC-Q100 qualified, 4-VLGA package, Enable/Disable function.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6001JE1B-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply1.3mA (Typ)
Frequency24 MHz
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VLGA
Absolute pull range±50ppm

Product details

The -20°C to 70°C operating range suits cabin or climate-controlled enclosures, while the 1.8V to 3.3V supply range lets it run directly off a 3.3V or 1.8V rail without a separate regulator.

MEMS resonator vs quartz — what the package and ratings mean for layout

Unlike a quartz oscillator, this part uses a MEMS resonator inside a 4-VLGA package measuring 2.50 mm x 2.00 mm. The MEMS construction gives better shock and vibration immunity — useful if the board sits near a motor or in a portable device. The 0.89 mm seated height keeps the profile low for tight enclosures.

Active production — sourcing and lifecycle note

The ±50 ppm absolute pull range is a stability spec that covers the total frequency variation over voltage, temperature, and aging — adequate for most MCU and CAN bus clock applications.

Frequently asked questions

Is DSC6001JE1B-024.0000T AEC-Q100 qualified and suitable for automotive use?

Yes — the DSC6001JE1B-024.0000T carries AEC-Q100 ratings, meaning it has passed the automotive qualification tests for temperature cycling, ESD, and latch-up. The -20°C to 70°C operating range fits cabin or climate-controlled automotive modules, not under-hood or engine-bay environments.

Can DSC6001JE1B-024.0000T replace a standard 24 MHz quartz oscillator?

Functionally yes — it provides a 24 MHz CMOS clock output with an Enable/Disable pin. The MEMS resonator means the package is a 4-VLGA, which is a different footprint from a typical quartz oscillator in a 4-SMD or 8-SMD package. Check the board layout for pad compatibility before substituting.

What is DSC6001JE1B-024.0000T's listed output type?

The output is CMOS, which is a single-ended logic level compatible with standard digital inputs on MCUs, FPGAs, and ASICs.