24 MHz MEMS XO with AEC-Q100 grade for automotive clock trees
The DSC6001JE1B-024.0000 is a 24 MHz MEMS-based oscillator (XO) from Microchip's DSC60XXB series, delivering a CMOS output from a 1.8V–3.3V supply while drawing just 1.3 mA typical — roughly half the current of a comparable quartz oscillator at the same frequency. AEC-Q100 qualification (Grade 3, -20°C to +70°C ambient) means this part carries the automotive-grade screening for reliability stress, temperature cycling, and ESD immunity — suitable for body controllers, infotainment, or ADAS peripheral modules that see cabin or under-hood thermal profiles.
Enable/Disable function and MEMS survivability
The Enable/Disable pin lets the system gate the clock output without removing power — useful for power-sequencing or test modes where the clock tree must be quieted while the oscillator itself stays biased. A MEMS base resonator is inherently more shock- and vibration-tolerant than a quartz blank — no fragile crystal to fracture under mechanical stress, which matters in engine-bay or motor-drive deployments where quartz oscillators can fail from sustained vibration.
Active production and procurement posture
It is suitable for new designs and does not require a last-time-buy window. No stock-holding claim is made — each order is quoted to the requested volume.