Skip to main content
Log in
Microchip Technology DSC6001JE1A-PROGRAMMABLE — Crystals & Oscillators

DSC6001JE1A-PROGRAMMABLE MEMS XO Oscillator – Microchip

MPNDSC6001JE1A-PROGRAMMABLE
Obsolete

Microchip Technology DSC60XX series, XO (Standard) MEMS oscillator, CMOS output, programmable frequency 1 MHz to 80 MHz, 2.50mm x 2.00mm 4-SMD package, AEC-Q100 rated.

Microchip Technology DSC6001JE1A-PROGRAMMABLE datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC6001JE1A-PROGRAMMABLE specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XX
MountingSurface Mount
Supply voltage1.71V ~ 3.63V
Current - supply1.3mA (Typ)
Current - supply (Disable)12 µA
Available frequency range1 MHz ~ 80 MHz
Frequency stability (Total)±50ppm
Operating temperature-20°C ~ 70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageBulk
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator with automotive qualification

The 4-SMD, no-lead package measures 2.50 mm x 2.00 mm with a seated height of 0.89 mm, fitting tight PCB layouts where a quartz crystal and separate oscillator IC would consume more board area.

Supply voltage and current draw

Operates from a 1.71 V to 3.63 V supply, covering common 1.8 V, 2.5 V, and 3.3 V logic rails without an external regulator — the wide input range simplifies BOM consolidation.

Microchip lists the DSC6001JE1A-PROGRAMMABLE as obsolete. No official successor or replacement part number is recorded in the lifecycle data. No pin-compatible direct replacement from Microchip has been identified.

Frequently asked questions

What is the output type and frequency range of the DSC6001JE1A-PROGRAMMABLE?

It provides a CMOS output and covers a programmable frequency range from 1 MHz to 80 MHz. The exact output frequency is set during programming before shipment.

Does the DSC6001JE1A-PROGRAMMABLE have a disable function?

Yes, the Enable/Disable function is built in. When disabled, the supply current drops to 12 µA max, allowing the oscillator to be gated for power saving without removing the supply rail.

What is the difference between the DSC6001 and DSC6002 series?

The evidence does not provide a direct comparison between the DSC6001 and DSC6002. Both are part of the DSC60XX MEMS oscillator family. For specific parametric differences, refer to the Microchip DSC60XX datasheet.