Skip to main content
Microchip Technology DSC6001HI2B-005.0000T — Crystals & Oscillators

DSC6001HI2B-005.0000T MEMS XO 5 MHz CMOS AEC-Q100 Active

MPNDSC6001HI2B-005.0000T
Active

Microchip Technology DSC60XXB series, XO (Standard) MEMS oscillator, 5 MHz CMOS output, ±25 ppm frequency stability, AEC-Q100 qualified, 4-VFLGA package, Tape & Reel.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC6001HI2B-005.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC60XXB
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply1.3mA (Typ)
Frequency5 MHz
Frequency stability±25ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.063\" L x 0.047\" W (1.60mm x 1.20mm)
Height - seated0.035\" (0.89mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-VFLGA

Product details

The DSC6001HI2B-005.0000T is a 5 MHz MEMS-based XO (Standard) from Microchip's DSC60XXB series, delivering a CMOS output with ±25 ppm frequency stability across the full -40°C to +85°C industrial temperature range.

Supply range and package footprint

Housed in a 4-VFLGA package measuring 1.60 mm x 1.20 mm with a seated height of 0.89 mm, this is a compact footprint for space-constrained PCBs in automotive camera modules or telematics units. Surface-mount assembly on a standard 4-pin LGA land pattern; no external load capacitors are needed because the MEMS resonator and oscillator circuit are integrated inside the package.

Frequently asked questions

Does DSC6001HI2B-005.0000T require external load capacitors?

No. Because the base resonator is MEMS and the oscillator circuit is fully integrated, the DSC6001HI2B-005.0000T does not need external load capacitors. It is a drop-in XO replacement for a quartz crystal + load cap network.

What is the difference between DSC6001 and DSC6002 series?

The DSC6001 series (this part) is a standard XO with CMOS output. The DSC6002 series adds a spread-spectrum modulation feature to reduce EMI. Both share the same package, supply range, and AEC-Q100 qualification. For a non-spread-spectrum clock, the DSC6001 is the correct choice.